{“specs”:{“spec”:[{“name”:”MT_AllowRetailStyle”,”value”:”false”},{“name”:”MT_Contents”,”value”:”(8) Relay test jumpers from the RTJ101 and RTJ102 kits tofit most of the popular relays |(1) RTJ104 Test Lead Kit |(1) ET69250 Terminal Leads with Switch/Fuse/Power |(1) RPP46950 Relay Puller Pliers”},{“name”:”MT_FeaturesAndBenefits”,”value”:”Jumpers have tabs for clamping and flat pads to place test leads on |No need to pierce wires or connect multiple jumper wires |Easily and securely connect relay test jumpers to a multimeter |Terminal Leads with Switch/Fuse/ Power provides the technician several ways to check the fuses that are in the panel |Five wire set that fits these fuses; Female-Pal, JK, LJK, Male-L-mini, Mini, ATO, and Maxi |One set of wires has no ends, allowing the technician to crimp any style they need |Different sized ends on the wires give flexibility to plug directly in the relay base or to fit other relay sizes not covered by the jumpers |Remove any fuse and plug in the correct wire and plug the other end into a meter and take a current reading without using a clamp-on tester |Use the on/off switch to control a circuit |Test before or after the switch by using the stacking banana plugs |The power lead can apply external power to only the circuit that you are working on |There are two 3-1/2′ extensions to be used if you are controlling a circuit while the vehicle is on a hoist |The in-line fuse holder (common ATO fuse style) protects the circuit and meter when testing |Relay Puller Pliers for removing electrical relays on most domestic and import vehicles |Offset handle and thin tips allow access to relays in confined areas |Specially designed tips are angled to fit slots or the edge of the relay cover |Allows the relay to pop free from the socket with less chance of damaging the relay cover”},{“name”:”MT_HidePrice”,”value”:”false”},{“name”:”MT_IndexName_Specs”,”value”:”Relay Tester”},{“name”:”MT_Pims_Description”,”value”:”22-PC. Master Relay and Fused Circuit Test Set”},{“name”:”MT_ProductName”,”value”:”Circuit Test”},{“name”:”MT_Style_Specs”,”value”:”Relay; Fused”},{“name”:”MT_Type_Specs”,”value”:”Circuit Tester”}]},”refiners”:{“refiner”:[{“name”:”Style”,”value”:”Relay; Fused”},{“name”:”Type”,”value”:”Circuit Tester”}]},”featuresandbenefits”:”Jumpers have tabs for clamping and flat pads to place test leads on |No need to pierce wires or connect multiple jumper wires |Easily and securely connect relay test jumpers to a multimeter |Terminal Leads with Switch/Fuse/ Power provides the technician several ways to check the fuses that are in the panel |Five wire set that fits these fuses; Female-Pal, JK, LJK, Male-L-mini, Mini, ATO, and Maxi |One set of wires has no ends, allowing the technician to crimp any style they need |Different sized ends on the wires give flexibility to plug directly in the relay base or to fit other relay sizes not covered by the jumpers |Remove any fuse and plug in the correct wire and plug the other end into a meter and take a current reading without using a clamp-on tester |Use the on/off switch to control a circuit |Test before or after the switch by using the stacking banana plugs |The power lead can apply external power to only the circuit that you are working on |There are two 3-1/2′ extensions to be used if you are controlling a circuit while the vehicle is on a hoist |The in-line fuse holder (common ATO fuse style) protects the circuit and meter when testing |Relay Puller Pliers for removing electrical relays on most domestic and import vehicles |Offset handle and thin tips allow access to relays in confined areas |Specially designed tips are angled to fit slots or the edge of the relay cover |Allows the relay to pop free from the socket with less chance of damaging the relay cover”,”schoolnames”:{“value”:null},”contents”:”(8) Relay test jumpers from the RTJ101 and RTJ102 kits tofit most of the popular relays |(1) RTJ104 Test Lead Kit |(1) ET69250 Terminal Leads with Switch/Fuse/Power |(1) RPP46950 Relay Puller Pliers”,”drawings”:null}